This mechanical comprehension test is one of the most widely used mechanical tests in the world and is a subtest of the Armed Services Vocational Aptitude Battery (ASVAB). The ASVAB mechanical comprehension test is a part of the computerized CAT version of the test as well as the pencil and paper test. This test is designed to measure knowledge of mechanics and machinery. The computerized version is 20 minutes long and has 16 questions. The manual version of the test is 19 minutes long and has 25 questions. 

Assessment-Training.com offers a US Department of Defense Test of Mechanical Aptitude practice pack, tailor-made for the US Department of Defense Test of Mechanical Aptitude. This test includes questions in the style of US Department of Defense Test of Mechanical Aptitude. These are questions about the following subjects:

• Pulleys and Levers:

  In a mechanical aptitude Pulley & Lever test, you may be asked to differentiate whether the input torque or the output one is larger. You may be asked to establish the volume of force needed for lifting a load. You may also have to identify the course of its tilt.

• Hydraulics:

  This test is designed to assess your ability deal with the mechanical properties of liquids. It can be used for the generation, control, and transmission of power by the use of pressurized liquids.

• Resolution of Forces, Centrifugal Force, and Inertia:

  Resolution of forces, Centrifugal forces, and Inertia force is directed away from the axis of rotation that appears to act on all objects when viewed in a rotating frame of reference.

• Structures, Planes, and Slopes:

  The slope or gradient of a line is a number that describes both the direction and the steepness of the line. In this test you are will be asked to calculate sums with the given information through structure plans and slopes.

• Gears and Belt Drives:

  Gears and Belt drives are usually designed to transmit the spherical torque to another cogwheel. In a mechanical aptitude test, you may be asked to identify the direction or the velocity of the cogwheels portrayed.

• Gravity and Velocity:

  This test is designed to assess your ability to calculate the change that is going on in combination with gravity. In a mechanical reasoning test, questions given based on gravity include swinging pendulums, fallings objects or structural support mechanisms.

• Center of Gravity:

  This test is designed to assess your ability to quickly calculate or find the center of gravity. In a mechanical reasoning test, questions given based on gravity include swinging pendulums, fallings objects or structural support mechanisms.

• Heat:

  This test is designed to assess your ability to measure your knowledge regard to temperature and its effect.

• Shape and Volume: 

  This test is designed to assess your ability to calculate the shape and volume of common figures. By practicing you will be prepared for the real assessment. 

Visitors who were interested in this product were also interested in our General Mechanical Comprehension Test.

The US Department of Defense Test of Mechanical Aptitude Preparation Package offers you:                                                                    

• 27 tests with 20 questions each, this is 540 questions in total! All questions are provided with detailed explanations of the solutions. 

• Our unique Personal Progression Tracking System that will allow you to track your progression in real time, receive instant insight into your results and test statistics, and let you compare to your norm group.
  This feedback will let you know how much you need to practice so you can distinguish yourself from other candidates! 

• 24 hours, 7 days a week online customer service to help you with possible and doubts and inquiries you may have. 

• 30 days access to the tests when buying the US Department of Defense Test of Mechanical Aptitude Preparation Package or All Tests Pack. 

• By practicing with our tests, you will identify the skills you need to practice more, improve your score and confidence, and have a solid performance in the real tests.

Your performance depends on practice and feedback.

When you practice with similar tests like the ones you will be assessed with, your performance and confidence will improve. After all, practice makes perfect. A survey among our clients has shown that by practicing with our tests, their scores have increased up to 80%!

By practicing with our Mechanical Reasoning tests, you will improve your analytical, logical and problem-solving abilities. Moreover, by being familiar with the test format and time limits, you will know how to solve the questions in a precise and effective way.

To help you become an expert in Mechanical Reasoning, all our tests will provide you with comprehensive explanations and feedback for every question. This way you will know the areas you need to improve and maximize your performance.

Being asked to take an aptitude test, like the Mechanical Reasoning Test, can be overwhelming. For this reason, we provide you the tools to take your tests with more confidence and ensure that you give your 100% in the assessment process.  

By achieving a high score on your assessment, you will differentiate yourself from other candidates and become closer to getting your dream job!

Of all the clients that have practiced with Assessment-Training.com, 96% recommends practicing at Assessment-Training.com!

By practicing mechanical aptitude tests, you can improve your performance during the real test by familiarizing yourself with the format and time-pressure.

Important characteristics of mechanical aptitude tests are:

• Mechanical aptitude tests usually consist of multiple-choice questions (only one option is correct in each case) regarding a set of mechanical problems. 

• Each question offers a mechanical scenario based on a variety of topics, such as pulleys and levers, hydraulics, resolution of forces, gears and belt drives, gravity and velocity, heat and shape and volume. 

• Mechanical aptitude tests are administered under exam conditions and strictly timed. The given time per test differs per test publisher; some tests provide relatively generous time limits, while others are shorter. 

• Test takers are usually permitted to use a rough sheet of paper. 

• The level of complexity and difficulty of test questions depends on the position that you are applying for.

There are several mechanical reasoning tests, made by different publishers. Each of these tests has their own characteristics and uses. Well-known mechanical reasoning tests are: 

Bennett Test of Mechanical Comprehension: The Bennett Test of Mechanical Comprehension (BMCT) by TalentLens is a widely used mechanical test that requires candidates to respond to questions associated with a series of illustrations showing a particular mechanical principle in operation. The BMCT focuses on practical problem-solving skills and measures a complex set of abilities composed of three primary facets or constructs, being mechanical information, spatial visualization, and mechanical reasoning and understanding. The Bennett Mechanical test is used in a wide range of occupations, such as automotive mechanic, machine operators, aircraft/ship mechanics, industrial/technical sales representatives and other installation, maintenance and repair fields of work. For more information click here.

Wiesen Test of Mechanical Aptitude: The Wiesen Test of Mechanical Aptitude (WTMA) measures mechanical aptitude and ability to learn how to use and maintain equipment/machinery. It is designed to help predict performance for specific occupations that involve operating, maintenance, and servicing of tools, equipment, and machinery. This test is 30 minutes long and has 60 questions. The WTMA test is scored in two ways; a raw score and a percentile ranking. The raw score is a measure of many questions that are scored correctly by the candidate, and the percentile ranking is a relative performance score that indicates how the candidate’s score rates in relation to the score of other candidates who have taken the Wiesen Mechanical Test. For more information click here.

Barron’s Test of Mechanical Aptitude: Barron’s Test of Mechanical Aptitude has its origins in the armed services. It is used to measure the mechanical reasoning ability of candidate’s and is available in computerized as well as pencil and paper form. For more information click here.

Stenquist Test of Mechanical Aptitude: The Stenquist Test of Mechanical Aptitude is a slight variation from the standard mechanical comprehension aptitude tests, such as Bennett and Wiesen. The Stenquist test consists of a series of problems presented in the form of illustrations. Based on these provided illustrations candidate’s are required to determine which illustration fits in with another group of illustrations. Even though this is a different way of measuring mechanical comprehension, it still measures the same skills as the other tests. 

CEB Mechanical Comprehension Test: The CEB Mechanical Comprehension Test is a widely-used test that is designed to assess a candidate’s ability to understand basic mechanical principles and their application to devices such as gear, levels, and miscellaneous machinery. This test is used for job positions that require an understanding of mechanical principles and their application, but also the usage of equipment, hardware, and machinery. The CEB Mechanical Comprehension Test is used in a wide range of industry sectors, such as engineering, maintenance, manufacturing, construction, and transportation. This test is 10 minutes long and has 15 questions. For more information click here.

Keep in mind these useful tips and tricks when you solve the US Department of Defense Test of Mechanical Aptitude Tests: 

• Read the question and instructions accurately. Even though this seems logical, often candidates miss out critical information. 

• Concentrate on the details and look for an answer in a methodically way. 

• Try to look at only one aspect of a shape at a time. Look at orientation, size, location and the movement to decode the pattern. 

• Stay calm; you will do great! If you’re stuck and can’t spot the pattern try starting at the end of the sequence and work backward. This might give you a new perspective. 

• Multiple-choice tests use so-called ‘distractors’ as answer possibilities. These distractors are answers options which are deliberately similar to the right answer; in other words, the answer possibilities are designed to test if you read the question and provided information properly. 

• Be prepared with a pen and a piece of paper when doing the online test. 

• The most common operations you can expect during a mechanical aptitude test are:
  • Pulleys and Levers
  • Hydraulics
  • Resolution of Forces, Centrifugal Force, and Inertia
  • Structures, Planes, and Slopes
  • Gears and Belt Drives
  • Gravity and Velocity
  • Acoustics and Optics
  • Center of Gravity
  • Electricity
  • Heat
  • Shape and Volume  

Good luck practicing and successfully completing your assessment!

In Assessment-Training.com, our goal is to make your application process a success. We attempt this by providing training and advice in all parts of your job application process.

Job hunting can be a stressful and challenging process, that’s why we help you get confident and prepared for your assessments.

Assessment-Training.com provides the tools to make you stand out from other candidates. We want you to get that job! Prepare to succeed!